Kona Process 134 DL 27.5

The Process 134 DL is the smaller-wheeled sibling to our Process 134 DL 29. Built around a Kona 6061 aluminum frame, it features the same high-end components, including RockShox’s all...
$ 3,399.00

The Process 134 DL is the smaller-wheeled sibling to our Process 134 DL 29. Built around a Kona 6061 aluminum frame, it features the same high-end components, including RockShox’s all new Pike Select 140mm travel fork and Deluxe Ultimate rear shock. Our improved anti-squat and a SRAM GX/NX Eagle 12-speed drivetrain make climbing a breeze. The Process 134 DL is the perfect go-everywhere bike.
 SHARE WITH A FRIEND

Frame Material: Kona 6061 Aluminum Butted
Wheels: WTB KOM Light i30 TCS 27.5”
Suspension Platform: Beamer
Front/Rear Suspension: 140mm/134mm
Rear Shock: RockShox Deluxe Ultimate
Fork: RockShox Pike Select RC Charger DebonAir 140mm
Crankset: SRAM NX Eagle DUB 12spd
Drivetrain: SRAM GX/NX Eagle 12spd
Brakes: SRAM Guide R with 180mm front/180mm rear rotors
Seat Post: Trans-X Dropper Internal 31.6mm
Cockpit: Kona XC/BC 35mm Bar/ XC/BC 35 Stem with Kona Lock-on Key Grip
Front Tire: Maxxis Minion DHF EXO TR 3C 27.5x2.5" WT
Rear tire: Maxxis Minion DHF EXO TR 3C 27.5x2.3"
Saddle: WTB Volt Comp
FEATURES
KONA 6061 ALUMINUM
Kona 7005 and 6061 Aluminum alloys are used extensively throughout our fleet of mountain and asphalt bicycles. A tough, durable, light alloy, both Kona 7005 and 6061 deliver fantastic, reliable performance that lasts for thousands of rides. Much of our 7005/6061 tubing is butted and/or formed, meaning the tubing’s wall thickness can be increased or decreased, as well as shaped, so we can fine-tune a particular frame’s strength and ride characteristics depending on its intended application.

INTERNAL HEADSET
Bearing cups are actually pressed into the frame and are easily removable. An internal headset also reduces stack height, so the height of the stem and bars are more adjustable, giving the rider the best fit possible.

TAPERED HEAD TUBE
More girth at the bottom of the head tube better distributes shock force, prolonging the bearing life of the headset itself and eliminating brake shudder, while providing confident steering performance. The inherent strength of its triangular design also means a stronger steering position and improved balance, giving the rider more control in rough terrain. A zero-stack, tapered head tube also puts strength where the load is going—into the lower headset cup—maximizing bearing durability where it’s needed.

TUBELESS COMPATIBLE RIMS
Tubeless rims allow for tires with more puncture resistance; the ability to run lower tire pressure, which provides better tire grip on the trail; lower rolling resistance; and weight savings over traditional tube and tire systems.

12x148mm AXLE
12x142mm, 12x148 and 12x157 rear axle standards provide two major advantages to the Kona rider: the 12mm diameter of the rear axle provides the rear hub and frame with a stiff interface, while the 142/148/157mm outer diameter of the hub allows the wheel to be quickly and properly positioned in the frame before the rear axle is inserted. For 2017, you’ll see the 12x148 Boost standard in the mix. Boost spacing provides more tire clearance at the chainstay yoke, while the rear wheel is stiffer and more durable relative to a 12x142 thru-axle.

BEAMER INDEPENDENT SUSPENSION
Built to be off-the-top progressive, Beamer Independent Suspension helps the bike to stay higher in the travel and recover from hits more quickly. The Operators are instilled with what our product managers like to call “pure shock movement,” whereby the shock is protected from side load. Designed to be highly tuneable and extremely durable, the Beamer IS is our version of greased lightning.

27.5" WHEELS
The benefits of the 27.5-inch wheel are simple: they roll over obstacles and track better than 26-inch wheels, but are more maneuverable and nimble than 29-inch ones.